Search results

  1. 5

    Hilook NVR NVR-104MH-C / 4P Video Export issue

    Ok so another update - I did a basic reset on the system itself - set things up again (not a full factory reset) and it appears to have come good. One camera of the 4 was recording in full resolution.. and taking up a good chunk of the disk. the other 3 were low res.. I'm not sure if was to do...
  2. 5

    Hilook NVR NVR-104MH-C / 4P Video Export issue

    Actually I take that back - the playback of a recording on the main machine on a 1080p TV is pretty poor.. Ive been trhough all the settings and cannot find anything
  3. 5

    Hilook NVR NVR-104MH-C / 4P Video Export issue

    Thanks for the response Playback is generally good - I have the cameras all set at 3072x1728 also - so everything i can find is set to over FHD.. just when i download the files they are 360p and small (30mins at 10mb) its seems pointless recording at that if you cannot download at the full...
  4. 5

    Hilook NVR NVR-104MH-C / 4P Video Export issue

    HI All - I'm hoping this is a simple fix.... We have the above nvr at our premises and after an attempted break in i'm trying to download the video. The issue isnt that i can download it - its the fact that the downloaded video is very very poor and only 640x360 resolution. I have main and...
  5. 5

    NVR-104MH-C / 4P GUI

    Hi Guys Probably something simple, however I do not seem to be able to access the motion detection events or the previous days recording via the webgui (via IE) I can see them operating the NVR directly. Issue seems to be I am not able to select the date on calendar so that i can search for...
  6. 5

    Hilook NVR-104MH-C/4P - add a fan

    I grabbed some sunon 40x10s as thats all that will fit. I've spliced into the 12v hdd line and added 2 fan plugs. I have also put some speed reducers in line to quiten them down a touch as there are 2.. not very quiet but i'd rather that than the HDD getting to 60+ Steve
  7. 5

    Hilook NVR-104MH-C/4P - add a fan

    Hi Guys I have a new NVR as above - it has a DS-80314 Board in it. It has no fan for the case and it gets a bit spicy in the case once the hard drive is operating. Has anyone retrofitted a fan to one of these? Space if there for a 40x10 or slightly larger depth but no fan header is present. I...
  8. 5

    Time shown on playback window

    All systems are local so PC time shows same as the camera - and the recorded clip shows the correct time - it just doesnt display on the playback window correctly and shows the same regardless of the clip selected (ie doesnt change as long as the clip is from the same camera) The picture I...
  9. 5

    Time shown on playback window

    Hi Guys Bit of a wierd one - as I record d2d I have turned off the BI time display and just using the HIK timestamp overlay which works fine for my purposes as they are hooked to a NTP server (not that they seem to sync that well!) Anyway - when playing back an alert the time shown at the top...
  10. 5

    Motion Detection zone sensitivity

    Yeah its strange - I did say specifically "my system" :) Bit rate is zero but there is a definite overhead even when hidden. Maybe its the motion detection - but that seems high for a small side slither of detection on the frame. I assume you have hardware acceleration - maybe that is the...
  11. 5

    Motion Detection zone sensitivity

    I hate to contradict you Fenderman but on MY system a clone camera adds about 7% cpu when maximised and about 5% minimised... hardware decoding may make a difference on other systems. Still wish it was the 6% of ivms but then.. I wish ivms had all the stuff of BI :) I can easily disable /...
  12. 5

    Motion Detection zone sensitivity

    Ah ok.. makes sense I guess - you just duplicate the camera and then set it up differently. Thanks Fenderman i'll give it a go.
  13. 5

    Motion Detection zone sensitivity

    HI Guys Still working my way round this software - just wondering if there was a way to make motion detection zones more / less sensitive. example - i have a camera covering some of the front of our property - the left side covers the whole front (in a strip) of the neighbours property - with...
  14. 5

    Pre Record ivms4200

    All Done.. 4x 3mp cams running at 20fps and 4096kbps bitrate - D2D and motion detection via BI 25% cpu usage maximised 16% minimised Not running as a service as it holds the CPU higher from some reason. Not quite the 6-7% via ivms - but it will have to do. How do HIKvision manage so...
  15. 5

    Pre Record ivms4200

    A fair comment - i'll have a look at what the exchange rate is currently (in Aus) and go from there.. i know the android app is $10aud.. the main app must work out to about 80aud or so.. Steve
  16. 5

    Pre Record ivms4200

    interestingly D2D isnt greyed out in my eval version so can be selected.. does that mean that it is working or not? Steve
  17. 5

    Pre Record ivms4200

    OK I give up... I'm gonna have to go BI The motion detection on the cameras is so close to being great - if only the sensitivity / proportion made sense / worked and if the expert mode had regions that could be drawn like the normal mode, rather than crappy boxes. Oh well.. BI i think it will...
  18. 5

    Pre Record ivms4200

    By the way with BI - how much cpu does the Motion detection use - or should I utilise the in camera like I do now (very clunky in expert - over sensitive in normal - if only there was a percentage slider in normal) Steve
  19. 5

    Pre Record ivms4200

    Hi Fenderman Thanks for the info. I'll have to check it out and cough up the funds.. if thats the only way to get a fully fledged install :) I now have IVMS kinda working - it looks like expert motion detection on the cams is funky - on the domes at least - the turrets seem more stable in this...
  20. 5

    ivms 4200 and failed live view on ivms 4500

    Well I have done a fresh reinstall with factory reset cameras. Rebooted between uninstall and reinstall of ivms reconfigured the whole system from scratch and still I get the same error of failed to receive data. I must be missing something or the streaming server isn't playing nice. I only...
  21. 5

    Pre Record ivms4200

    I'll be running 6 in total - nothing special :) but as its not a standalone machine - and that isnt an option - i'm trying to keep the overheads as low as possible. cameras will be 4x turrets (3mp - DS-2CD2335-I) and 2 domes (DS-2CD2732F-IS) as for the issues with a fresh install - still there...
  22. 5

    Pre Record ivms4200

    as im on a xeon e3-1280v3 I dont have the luxury of BI hardware decoding.. as I'm on a standalone card. With 24tb (able to write at 2.5gb/s) plus SSDs boot and scratch drives, a reasonable cpu and 32gb ram - you'd think it would be enough! Maybe I should crack my dual e5 v3 into life :) Just...
  23. 5

    Pre Record ivms4200

    ok something to consider - thanks. A fully fledged demo would help.. further to the original issue - am I right thinking the schedule for the storage server record should NOT be event template? if its all day then it records all the time - and events can therefore be captured with the pre /...
  24. 5

    Pre Record ivms4200

    I have the option for D2D in BI demo... but was seeing about 40% cpu use - ivms is down at the 6% are you saying even though D2D is selected that its not active? Steve
  25. 5

    Pre Record ivms4200

    Hmm a bit wierd I have both areas you mentioned set the same so 15s and 30s I noticed that the storage server template was set to event - so changed that to all day - and now I have pre-record - issue I have tho is that it seems to ignore my settings - I have 30s pre record regardless of what...
  26. 5

    Pre Record ivms4200

    Hi Guys PC based ivms4200 install with storage server setup and operating locally on PC - Sorry probably lots more questions to come - pre and post record settings - i have it set up 15s pre and 30s post in the storage schedule (in both storage of encoding server recording schedule and...
  27. 5

    ivms 4200 and failed live view on ivms 4500

    HI Guys I'm very new to this camera stuff so go easy! I have just set up 4 hikvision camera's - 2 turrets and 2 domes - models are irrelevent currently. I have a working local pc install of ivms 4200 - all cameras are streaming - motion detection is triggering recording (at least I can...
Top Bottom