URL for generic ipc365 IP camera to be used with ispy

I'm also trying to get this type of cam to work with ispy and have found the open ports are the same as yours 23456 and 34567. I've tried a LOT of different rtsp: 's with no luck.

I have some suggestions on how to find the stream. 360 eyes (pro) and IPC360 phone apps work for this camera on Android; wouldn't it be possible to somehow 'inspect element' in the Android app to see where it's sending the rtsp stream? The other possibility would be to connect the camera to the modem instead of WiFi to somehow find the stream.
 
RoseGold said:
The PTZ controls are being proxied to some server in China back to the camera.

Sending the following packets gives your basic controls
Code: 
/ Right
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Left
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 fb ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Down
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fb ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Up
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Click to expand...

Hi,

That's great, thanks. I got my cam working but no ptz so far. How did you sent those codes to the camera? Which port?
 
slickochet said:
How did you get it working?
Click to expand...

I have a local brand NVR which support ONVIF, so it was kind easy this step. I also got it working on VLC using the URL rtsp://admin:123456@<ip>:554/live/ch0. But I guess that the real catch is to first enable ONVIF on the "IPC360 Pro" app (IOS here). Under device configurations there's a "ONVIF" section which you can enable ONVIF. The default user/password is admin/123456. You can change the password on the app too.

p.s. The forum seems to mess with forward slashes! so just in case, it shoud be: rtsp slash slash admin...
 
What I bought was this cam: 720P 1080P Wireless IP Camera Intelligent Auto Tracking Of IR Night Baby Monitor Work Well With App IPC360 Mini Camera.
Not sure it is the same as yours but it is visually similar to what you described. The OEM producer is PUWELL CLOUD LIMITED. The setup manual tells us to install this IPC360 app.
The ONVIF-style direct connection is DISABLED by default. As soon as I enable it in the app it is accessible with ONVIF Device Manager, admin/123456. Hostname IPC365. RTSP port is 554, HTTP 80.
I hope it helped you. If the initial setup with the app fails, let me know, I will send you my instruction copy.

chrlyra said:
But I guess that the real catch is to first enable ONVIF on the "IPC360 Pro" app (IOS here). Under device configurations there's a "ONVIF" section which you can enable ONVIF. The default user/password is admin/123456. You can change the password on the app too.
Click to expand...
In the Play Store, there are separate IPC360 and IPC360 Pro apps, I suspect they are made to work with separate cam models.
 
Nickrus said:
What I bought was this cam: 720P 1080P Wireless IP Camera Intelligent Auto Tracking Of IR Night Baby Monitor Work Well With App IPC360 Mini Camera.
Not sure it is the same as yours but it is visually similar to what you described. The OEM producer is PUWELL CLOUD LIMITED. The setup manual tells us to install this IPC360 app.
The ONVIF-style direct connection is DISABLED by default. As soon as I enable it in the app it is accessible with ONVIF Device Manager, admin/123456. Hostname IPC365. RTSP port is 554, HTTP 80.
I hope it helped you. If the initial setup with the app fails, let me know, I will send you my instruction copy.


In the Play Store, there are separate IPC360 and IPC360 Pro apps, I suspect they are made to work with separate cam models.
Click to expand...

Thanks for the suggestion! I got one camera added to the app but there is no onvif option in the cameras settings (see below)
 

Attachments

  • 2020-04-22 21.01.28.jpg
    2020-04-22 21.01.28.jpg
    255.7 KB · Views: 61
Oh, that's a bummer... I do have it right after the Share Camera. Check out my device model and Firmware version. It won't help but just in case.
I don't remember if ONVIF was there before I tried the cloud service. Maybe try signing up for the cloud services (no card required), it might get activated after that.

1587592317075.png
 
Hi again! Thanks for this suggestion too. Sadly, it did not work either. I signed up for the trial of the cloud services and still no sign of onvif (see attached settings picture). I have also attached my model number and it seems like it may be a similar line, but is a different model and an older firmware too. I have not been able to find anywhere to get a firmware update from either.
 

Attachments

  • 2020-04-22 23.03.06.jpg
    2020-04-22 23.03.06.jpg
    256.1 KB · Views: 43
  • 2020-04-22 23.05.35.jpg
    2020-04-22 23.05.35.jpg
    176.3 KB · Views: 43
I guess you've already tried doing Firmware Update Check. If there is no update, then it might be it. There are hacker forums where they could try extracting my firmware and upload it to your device but it's just not worth it. Sorry.
 
slickochet said:
Hi again! Thanks for this suggestion too. Sadly, it did not work either. I signed up for the trial of the cloud services and still no sign of onvif (see attached settings picture). I have also attached my model number and it seems like it may be a similar line, but is a different model and an older firmware too. I have not been able to find anywhere to get a firmware update from either.
Click to expand...
Hello,

maybe you have the wrong version of 360Eyes-App on your phone. It's Android? Ich had it installed on my and my kids phones and found ther different looking of the app.

my 360Eyes-App with the "ONVIF-Setting" is Version: 3.5.0.18 (you may find on phone in settings/apps/app info....

I even couldn't connect the cam via ispy and tried thousands of settings....

I succeeded now with the proposal of Nikogregu (Post #10, but don't forget to eleminate the spaces between the entries!) "rtsp:/admin:XXXX@192.168.X.X:556/cam/realmonitor?channel=1&subtype=1" in VLC Plugin (Port depends on your settings).

Only the PTZ-settings I couldn't solve yet.
 
calculator1235 said:
Hello,

maybe you have the wrong version of 360Eyes-App on your phone. It's Android? Ich had it installed on my and my kids phones and found ther different looking of the app.

my 360Eyes-App with the "ONVIF-Setting" is Version: 3.5.0.18 (you may find on phone in settings/apps/app info....

I even couldn't connect the cam via ispy and tried thousands of settings....

I succeeded now with the proposal of Nikogregu (Post #10, but don't forget to eleminate the spaces between the entries!) "rtsp:/admin:XXXX@192.168.X.X:556/cam/realmonitor?channel=1&subtype=1" in VLC Plugin (Port depends on your settings).

Only the PTZ-settings I couldn't solve yet.
Click to expand...

Thanks for the suggestion!

Unfortunately I still haven't had any luck with this version either. Checking my cameras in it still gives no ONVIF option....
 

Attachments

  • 2020-05-28 11.01.56.jpg
    2020-05-28 11.01.56.jpg
    197 KB · Views: 27
  • 2020-05-28 11.02.22.jpg
    2020-05-28 11.02.22.jpg
    260.3 KB · Views: 34
Hello,

solved PTZ: when selecting in PTZ-settings of ispy the model "CVLM 133 IP Camera", I can use PTZ. (Tried boring one camera after the other, beginning with "a".... :sleepy:
 
RoseGold said:
Greetings,

Glad to see others have purchased this model, I recently purchased "360Eyes IPC365" from amazon.
After lots of research I was unable to find anything. So I started doing some probing of my own,

Here are some of my findings:
Using the camera default application, Navigate the settings and turn on ONVIF.

IPC365 Cams are hosted over rtsp protocol on port 554 using authentication,
Example: rtsp:/admin:123456@192.168.1.68:554/live/ch0

Playing with the channels will give different resolutions.

The PTZ controls are being proxied to some server in China back to the camera.

Sending the following packets gives your basic controls
Code: 
/ Right
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Left
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 fb ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Down
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fb ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Up
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Signature:
Code: 
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00

Functions:
Code: 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Click to expand...

how do you insert that in ispy ? it has a file called ptz2.xml just in case you would know ?

i have a p2p cam seems to be ipc365 (as per onvif device manager but in camera it says ec85-x15
 
I recently bought 3 of these little gems. They're cheap and have a good pic. I took a chance because I want all of my IP cams (18+ from 10+ mfg, to work with iSpy. I've got two of them working with iSpy at rtsp:/user:pass@ip:554/cam/realmonitor?channel=2subtype=1 <b><u>USING UDP</u></b>. Nothing happens with Auto or TCP, but UDP works.

The third IPC 530 is still a challenge. I can get it to work with VLC, but I really don't want to introduce yet another moving part. Cam to iSpy to Firefox, managed by Homeseer, is enough.

Some weird stuff, however. iSpy won't connect to this URL with an 4'th octet > 200. I use a 10. network, and iSpy would not accept 10.0.0.220. Also, these little cameras don't appear to use DHCP. I can give my router (ASUS) a reservation for the UUID, but the camera comes up with some different address. I'm hopeful that setting the ONVIV address will keep it stable ... I guess I'll find out during the next power outage.
 
RoseGold said:
Sending the following packets gives your basic controls
Code: 
/ Right
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Left
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 fb ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Down
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fb ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

/ Up
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Signature:
Code: 
cc dd ee ff 77 4f 00 00 e3 12 69 00 48 00 00 00 00 00 00 00 af 93 c6 3b 09 f7 4b 01 01 00 00 00

Functions:
Code: 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Click to expand...

Hi could you describe how you sent these codes to your camera?
 
You must log in or register to reply here.
Top Bottom